FLET'S Hikari Next / FLET'S Hikari Light / docomo Hikari 1 Gbps
This page gives you information on how to set up the connection, and precautions for either of the following connection courses.
- Asahi Net docomo Hikari 1 Gbps
- Asahi Net FTTH with FLET'S
- FLET'S Hikari Next
- FLET'S Hikari Light
Settings
|
User Name*1 |
Asahi Net ID@atson.net |
|---|---|
|
Password |
The password for the User ID |
|
Authentication |
CHAP |
|
DNS (Name) |
Set to Automatic |
- *1A modified User Name is required if using our Fixed IP Address Option. Please refer to this page for details:
- *2Password should all be entered in lowercase.
If you have a Hikari Denwa router
Before setting up
The setup is different depending on the model. Before setting up, please refer to the manual of your model for details.
This section gives you information on how to set up the Hikari Denwa router PR-500KI as an example.
If you do not have a Hikari Denwa router
Connects to the internet using the PPPoE function of OS, or the FLET’S connection tool.
See the following for how to set up the respective OS.
If you are using a router prepared by yourself
Please refer to the manual of your model for details and set the information under the Settings section above.
If you are not sure how to operate your router, please contact the manufacturer of the router.
Operating environment of IPv6 Connection Feature
Generally, there is no need to set up the device if you are using the IPv6 Connection Feature. See the following operating environment requirements.