About this page

This page gives you information on how to set up the ADSL Modem-MNV for using the IP-Phone-C.

Before setting up

See the manual of the router/modem to set up.

1. STEP1

   Wiring

   Connect the IP-Phone supported device, computer, and your phone with cables.
   See the manual of the IP-Phone supported device for wiring instructions.
   See also if the ACR (LCR) function is disabled on your phone device.

2. STEP2

   Internet connection setup

   Set up the internet connection of IP-Phone supported device.

   Internet Connection Settings for ADSL Modem-NVIII

3. STEP3

   IP-Phone setup

   Set up your IP-Phone while you are connected to the internet.

   • Phone Function Settings for IP-Phone-C (Manual)
   • Phone Function Settings for IP-Phone-C (Automatic)

   After completing the setup, check your device’s lamp status if it is correctly connected.
   See the manual of your router/device for details.

   

   Correct status

   ADSL	Green light is on
   PPP	Green light is on
   LAN	Green light is on
   VoIP	Green light is on
   PWR	Green light is on

How to use

See the following for how to use IP-Phone-C.

Setup Guide: How to Use IP-Phone-C