Windows 10 Connection Settings
This is a connection setup guide for those using Windows 10 on the following services: FLET’S Hikari Next, FLET’S Hikari Light, B FLET’S, FLET’S ADSL.
Before setting up
You can connect with NTT's FLET'S fiber-optic lines by using the PPPoE feature in Windows 10. (Please do not install any Japanese software you have received from NTT or other PPPoE software.)
In order to connect with the FLET’S line, there is a need to install the fiber-optic line and have the contract for a matching connection course.
* If you are using a router, this setup is not required.
Setting up broadband connection (PPPoE)
STEP 1 Start Menu
Click Start and select Settings .
STEP 2 Settings
Click Network & Internet.
STEP 3 Status
Click Network and Sharing Center.
STEP 4 Network and Sharing Center
Click Set up a new connection or network.
STEP 5 Set up a new connection or network
Select Connect to the Internet and click Next.
If a message “You are already connected to the Internet” shows up
Select Set up a new connection anyway.
If a message “Do you want to use a connection that you already have?” shows up
Select No, create a new connection and click Next.
STEP 6 Connect to the Internet
Click Broadband (PPPoE).
STEP 7 Type the information from your Internet service provider (ISP)
|User name||Asahi Net ID@atson.net
(e.g., email@example.com, firstname.lastname@example.org, email@example.com)
If using the Fixed IP Address Option:
f.Asahi Net ID@atson.net
|Password||Corresponding Asahi Net password|
|Connection name||Any name (e.g., Asahi Net)|
* User name and password must be entered all in lowercase letters.
After typing in the information, click Connect.
STEP 8 Establishing connection
The internet connection test will start. Please wait awhile.
Connection to the internet is established. Click Close and your connection setup is completed.
To connect to the internet next time, please follow the instructions below.
Click the connection icon in the taskbar and click the connection (e.g., ASAHI Net) you just created.
Select Dial-up, click the connection you just created (e.g., ASAHI Net) and click Connect to connect to the internet.
If you wish to disconnect, click the connection icon in the taskbar.
Select Dial-up, click the connection you just created (e.g., ASAHI Net) and click Disconnect to disconnect from the internet.