Asahi Net : Setting : Web Caster X400V configuration
Web Caster X400V configuration.
I. Before making the configuration, ensure that...
1. You have entered into a FLET'S contract with NTT and have received their Web Caster X400V.
Example setup: B FLET'S media converter and Web Caster X400V
Step 1: Open a Web browser
Open a Web browser (Internet Explorer or Netscape, for example).
You are going to use the Web browser as the means to access the configuration pages of the Web Caster X400V.
Enter http://192.168.1.1 in the address box of the Web broswer, then hit the Enter key on your keyboard.
Step 2: Create the Administration password
You must create a password with which you will access the Web Caster X400V configuration pages.
The Shouki settei (initial settings) screen will appear.
Enter a password of your choice in both the Atarashii Pasuwaado (new password) and Atarshii Pasuwaado kakunin (confirm new password) boxes. Enter the same password in both boxes. Please make note of the password you created as you will need to use it later in this configuration.
In the Eria settei (area selection) box, select the NTT area you are located in: NTT East or NTT West.
Click the Kakunin (confirm) button, followed by the Soushin (send) button.
If the Microsoft Internet Explorer alert displayed below appears, the administration password has been set successfully. Click the OK button.
Step 3: Log-in
If this is the second or consecutive time you are accessing the Web Caster, a log-in window will appear.
Enter admin in lower case characters in the Yuuzaamei (U) (User name) box.
Step 4: Setup
The Kantan settei (simple setup) window will appear. Enter the following settings:
Step 5: Re-starting the router
Click the Hanei (amend) button.
The Microsoft Internet Explorer alert that appears will ask you if you want to re-start the router. Click the OK button.
Note: If you click the OK button while you are on the phone, the WebCaster X400V will not re-start, so first hang up. If you are on the phone and you click the OK button, you will be shown a different window. Click the Modoru (return) button on that window.
Step 6: Confirming settings
From the left side Ruuta Settei (Router settings) menu, choose the PPPoE Settei (PPPoE settings) option.
The PPPoE settei (PPPoE settings) window will appear. Confirm the following settings:
a. Setsozoku saki 1 de setsuzoku suru (Connect with connection 1) : Setsuzoku suru (Connect).
If you change a setting, take these steps:
Step 7: Confirming an Internet connection
Click the left side Joutai hyouji (display status) option.
The Joutai hyouji (display status) window will appear.
Against the PPPoE joutai settei (sesshon 1) (PPPoE session 1) entry you will see Seijou (normal).
Finally, take a look at status of the lamps on the Web Caster X400V.
The POWER lamp should be green.
You should now be able to view Web pages, send and receive email, etc.
Step 8: Want to configure the Web Caster X400V for IP-Phone service?