Devices｜Asahi Net WiMAX 2+｜Asahi Net

Router Characteristics

• 1

  

  Fast, stable communications with
  simultaneous dual-band (2.4 GHz/5 GHz)

• 2

  

  Easy to connect Wi-Fi by
  scanning QR code

• 3

  

  Allows you to check data
  traffic at a glance

• 1

  The device is equipped with band steering feature² which determines the surrounding signal environment at a regular basis. It automatically selects the optimal frequency, enabling a more stable, high-speed Wi-Fi communication.

• 2

  Customers using iOS/iPadOS/Android devices⁴ can easily connect to Wi-Fi by just scanning the QR code using the standard camera on your device.

• 3

  In the Home screen, you can check the: "Daily Data Traffic⁵" for the past three days, "Monthly Data Traffic" in High-Speed Area Mode.

1. The connection speed shown is the maximum download speed of the system, and depends on the device you are using and service area. The actual communication speed slows down depending on your communication environment and on the traffic congestion on the internet. Available in certain areas. For information on service areas supporting max. download speed 440 Mbps, please check for service availability. If you'd prefer to check yourself, in Japanese, please click here .
2. The feature's factory default setting is OFF. You can select ON/OFF in the Initial Settings Wizard. Wi-Fi connection device has to be compatible with both 2.4 GHz/5 GHz and 802.11 v.
3. The figure shown here is an example measured by the manufacturer. The effect depends on your environment, and does no ensure the actual performance.
4. Supported operating systems are: iOS 11.0 and above, iPadOS 13 and above, Android 10 and above.
5. Monthly Data Traffic shows the data traffic calculated from the first day of every month.

See specifications of Speed Wi-Fi NEXT WX06

Router Characteristics

• 1

  

  Automatic
  communication
  switching function

• 2

  

  Wi-Fi TX
  Beamforming feature

• 3

  

  Installed with
  high-sensitivity antennas

• 4

  

  Selectable modes
  by setting performance

• 1

  The automatic switching from High-Speed Plus Area to High-Speed avoids overage of monthly data capacity.⁵

• 2

  Locates Wi-Fi devices and directs signals to the targeted device for faster Wi-Fi communication speed.⁶

• 3

  The improved antenna sensitivity allows to gets you connected all the time even at those places where connection was weak.

• 4

  Installed with three modes where you can select the balance between communication speed and power savings. You can also check the remaining communication time.

1. There is no dedicated cradle for Speed Wi-Fi NEXT W06. To connect to internet from this router with fixed line, use an USB cable get connected.
   (You will need a Type-C cable that supports USB 3.0 or higher.)
2. Available in Tokyo and certain areas of Saitama. Available in certain areas. For information on service areas, please check for service availability. If you'd prefer to check yourself, in Japanese, please click here.
3. When used with: High-Speed Plus Area Mode (paid service), high performance mode and 4x4 MIMO settings activated. With Wi-Fi connection: the maximum download speed will be 867 Mbps.
4. Type C cable (sold separately) that supports USB 3.0 or higher is required.
5. The maximum upload speed will be 75 Mbps. Available in all areas (certain areas of each prefecture).
6. If the total traffic volume exceeds 10 GB over a three day period, a speed restriction will be put in place.
7. The device connecting with Wi-Fi also has to support Wi-Fi beamforming feature.

See specifications of Speed Wi-Fi NEXT W06