WD701CV ADSL modem configuration.

I. Before making the configuration, ensure that...

1. Have you received notification of the opening date of this service?

You should have received notification by email, sent to the email address you supplied when completing your application for the ADSL service, of the date on which the ADSL service will be opened on your line. If you attempt this configuration before the ADSL service has been opened, you will not be able to connect to the ADSL service.

To connect to this ADSL service, you need to use a special connection ID which will be sent to you by post. Your ASAHI Net User ID and password will not be used for connection to the ADSL service. The connection ID takes the form of "E-EA###X###@atson.net". There is no password for connection to the ADSL eAccess service.

There is no software to be installed as part of this configuration. Connect the ADSL modem to your computer's LAN card with a length of "straight" Ethernet cable (supplied with the ADSL modem). Connect a length of modular telephone cable between your wall jack and the ADSL modem.

View of the back of the ADSL modem

Before continuing you will want to make sure the Java Script in your PC is active, and you are not using any Proxy Servers.

More information about the setup can be found in the documentation supplied with the ADSL modem. The instructions below and screens were performed on a Windows XP computer with Internet Explorer. Macintosh users may find some minor differences.

II. Configuration.

Open the setup page

1. Open a Web browser (Internet Explorer, for example). You must not connect to the Internet: you are going to use the Web browser as the means to open up the configuration page of the ADSL modem.

2. Enter 192.168.0.1 in the Address box of the Web browser, then hit the Enter key on your keyboard.

Create the Administration password

3. The first time you go through this procedure you are requested to create a password (of your own choice) with which you want to gain access to the ADSL modem setup page. Enter the same password in both the Pasuwaado and Pasuwaadosainyuuryoku boxes. Please make note of the password you choose, otherwise you won't be able to access the ADSL modem setup page again.

4. Click the Settei button.

Complete the quick setup wizard

5. Change the Settei pataan box to Settei 2.

6. In the Setsuzokusakimei box, enter asahi-net.

7. In the Uuzaamei box, enter the connection ID sent to you, e.g. E-EA999X999@atson.net.
The connection ID is case-sensitive, so enter it exactly as it appears on the sheet you received.

8. Leave the Pasuwaado box empty.

9. Click the Settei button.

10. In the next window that appears, make no changes. Click the Settei button. IP Phone setup will not be done on this page.

11. In the pop-up window, click the OK button.

12. A window will appear to notify you that the settings are being put into effect. You will need to wait for up to 30 seconds.

Warning: If you would like to get connected this time, then, when you see this window, with the number 30 in the lower left hand side, immediately, take your hands off your keyboard, and please, do not press the OK button(s) until after the POWER, ADSL, and PPP lamps on the ADSL modem are fully lit before proceeding..

13. Please wait for the ADSL modem to restart, and verify that the POWER, ADSL, and PPP lamps on the ADSL modem are fully lit before proceeding.

14. A window should have already appeared to notify you that the setup has completed. Please confirm that the the POWER, ADSL, and PPP lamps on the ADSL modem are fully lit before clicking this OK button.

15. In the following window, click the Hai (Y) button.

16. Now close any remaining pop up windows, and quit your Browser.

17. Open your Browser, and see if you can see homepages now.

III. Re-configure your settings.

How to re-configure the settings that you have entered

If you accidentally clicked on the OK button before your modem was connected, which prevented your connection, or if you entered the wrong UserID for example, you may need to access the setup page of the ADSL modem again to reset and restart the modem again, this is how you will do it.

1. Open a Web browser (Internet Explorer, for example).

2. Enter 192.168.0.1 in the Address box of the Web browser, then hit the Enter key on your keyboard.

3. A Network Password Login box will appear.

In the User name box enter admin. This should be entered in lower case.

In the Password box enter the Administration password you created when you first opened the setup window of the ADSL modem. This should be entered in lower case.

Click the OK button.

4. On the left-hand side of the window that appears, you will find a Kihon settei pull down menu. Open it.

5. From this menu, select the Setsuzoku saki settei option. In the window that appears, confirm the settings as follows.

Uuzaamei : enter the connection ID sent to you by eAccess.
E.g. E-EA###X###@atson.net.
Please note that the connection ID is case-sensitive.
Pasuwaado : leave this box empty.
IP adoresu no jidou shutoku : this box should be checked.
Saaba kara wariaterareta adoresu : this box should be checked.
Angoka sarete inai pasuwaado (PAP) : this button should be checked.

6. If you have made a change to the settings, click the Settei button. A message will inform you that the changes you have made have been saved. Then click the Touroku button.

7. In the pop-up window, click the OK button.

8. A window will appear to notify you that the settings are being put into effect. You will need to wait for up to 30 seconds.

Warning: If you would like to get connected this time, then, when you see this window, with the number 30 in the lower left hand side, immediately, take your hands off your keyboard, and please, do not press the OK button(s) until after the POWER, ADSL, and PPP lamps on the ADSL modem are fully lit before proceeding..

9. Please wait for the ADSL modem to restart, and verify that the POWER, ADSL, and PPP lamps on the ADSL modem are fully lit before proceeding.

10. A window should have already appeared to notify you that the setup has completed. Please confirm that the the POWER, ADSL, and PPP lamps on the ADSL modem are fully lit before clicking this OK button

11. In the following window, click the Hai (Y) button.

12. Now close any remaining pop up windows, and quit your Browser.

13. Open your Browser, and see if you can see homepages now.

IV. Confirming settings.

How to confirm the settings that you have entered

If you need to access the setup page of the ADSL modem again, this is how you will do it.

1. Open a Web browser (Internet Explorer, for example).

2. Enter 192.168.0.1 in the Address box of the Web browser, then hit the Enter key on your keyboard.

3. A Network Password Login box will appear.

In the User name box enter admin. This should be entered in lower case.

In the Password box enter the Administration password you created when you first opened the setup window of the ADSL modem. This should be entered in lower case.

Click the OK button.

4. On the left-hand side of the window that appears, you will find a Kihon settei pull down menu. Open it.

5. From this menu, select the Setsuzoku saki settei option. In the window that appears, confirm the settings as follows.

Uuzaamei : enter the connection ID sent to you by eAccess.
E.g. E-EA###X###@atson.net.
Please note that the connection ID is case-sensitive.
Pasuwaado : leave this box empty.
IP adoresu no jidou shutoku : this box should be checked.
Saaba kara wariaterareta adoresu : this box should be checked.
Angoka sarete inai pasuwaado (PAP) : this button should be checked.

6. If you have made a change to the settings, click the Settei button. A message will inform you that the changes you have made have been saved. Then click the Touroku button.

7. On the left-hand side of the window that appears, you will find a Joho pull down menu. Choose ADSL modem no jotai.

8. From this menu, confirm UP is displayed in the Kaisen linku joutai (line link status) is displayed.

9. The POWER, ADSL, and PPP lamps on the ADSL modem should now all be fully lit.